Finally getting around to fixing this up.
I purchased this in 2013 ??? I think.
Sorry Warren.
This is the second panel from the second box.
![]()
Schmitt Trigger & Triple Comparator
![]()
![]()
Z=-VE
![]()
![]()
Z=-VE
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
I purchased this in 2013 ??? I think.
Sorry Warren.
This is the second panel from the second box.
- Panel 2 of Box 2:
- 1 Dual Positive Slew
- 1 Dual Negative Slew
- 2 Envelope Generators
- 1 Triple Bi-directional Router
- 1 Triple Comparator
- 1 Schmitt Trigger
Schmitt Trigger & Triple Comparator
...
The Blue wire seems to be ground.
The Green is I think +12V
Links:
---------------------------------------------------------------------
Bi directional router
'''''Links:
Serge Modular - KS
Double check the wiring by looking at what the pads are labeled.
X=+VE
W=0VIn this case,
The blue wire at the bottom is -12V
Red is +12V
There is no 0V/GND connection to this module.
-------------------------------------------------------------------------------------
Envelope Generator. We have 2 of these
The boards are I believe 1st generation ... from 1973
Links:
Double check the wiring by looking at what the pads are labeled.
X=+VE
W=0VBlue (near the pots is marked W on the PCB) is ground.
Red (X) = +12V
Green (Y on PCB) = ??? My guess is its +6v.
Below are some pics from an extra Envelope Generator PCB. Its marked R7 so
is possibly also 1st generation, 1973.
This is not part of the Warren Burt pile but it might help me work things out.
Lovely dark blue colour too.
----------------------------------------------------------
Negative slew
-----------------------------------------------------------------------------------
Positive Slew
